Compared with 2024.2.2 released on August 2024, here are the new features and enhancements provided in R2024.3 release:
¶ New Features and Enhancements
Added new machine type of FUNMAT PRO 310 NEO.
Manual support
Leverage four tools to create custom supports, including cylinder, Box, Surface and Area.
Allow to choose specific support type for slicing, including Auto Support Only, Manual Support Only, Enable All supports and Disable All Supports.
See the help file for details: https://help.intamsys.com/en/home/INTAMSUITE_NEO/manual_support
Support Type
Support Blocker
Manual Support
Automatic Support
Per-model Override
Auto Support Only
Enable
Disable
Enable
Enable
Manual Support Only
Disable
Enable
Disable
Enable
Enable All supports
Enable only for automatic support
Enable
Enable
Enable
Disable All Supports
Disable
Disable
Disable
Disable
Sidewall support
A new kind of support structure can be generated to increase lateral stability in print for tall-thin and long-thin models, and accurately controlled by adjusting a number of parameters such as spacing , thickness, joint interval, joint penetration length, joint height.
Note: Support blocker works for sidewall support.
See the help file for details: https://help.intamsys.com/en/home/INTAMSUITE_NEO/sidewall
Drag and Drop Prime Tower
Hole Detection with Angle
Preview Environment
Switch to 2D mode(rendering print paths as lines) to improve the performance on AMD graphics card and large scale models.
Added banded display for lengend bar to make it easier to interpret the coloring.
Added two new result types for print time per layer and flow rate.
Support to view the temperature, layer height, flow rate, speed and other information of the current position of the printheads.
Extend Speed result type to include Travel and Wipe.
See the help file for details: https://help.intamsys.com/en/home/INTAMSUITE_NEO/Preview_Results
Input and display
On some dialogs, hover over the input control to see its valid range.
Both comma and period in English and Chinese are accepted for input, and all of them will be converted as decimal point for view.
Process Parameters
Support to set retraction extra prime speed/amount at Z Seam individually;
Support setting of prime tower base dimensions: base width, base slope and base height to enhance the stability of the prime tower;
Support for the inner and outer walls to enable arc fitting i.e. printing with G2/G3 motion;
Support section view under mesh and X-Ray display modes.
Change the format of scaling factor to percentage for model transformation.
Improved the quality of snapshot for IFP file.
Added support for Japanese language.
Updated the visual style of profile details dialog.
Local Print: Modify transport protocol, IP address and access password for disconnected printer in one dialog.
Local Print: Display IP address in printer dashboard.
It may take several minutes to start INTAMSUITE NEO for the first time, since it needs to read data from recent project files for home page.
Open INTAMSUITE V4.3 3mf file, we only support open the part models.
The program's performance on AMD Radeon graphics cards is relatively poor compared to Nvida graphics cards.
Cannot play the webcam LiveView remotely for FUNMAT PRO 410 and FUNMAT PRO 610HT.