¶ Auto-levelling
In some cases, you want to print models quickly to save time. Disabling the printer's auto-levelling feature can help you achieve such an ability.
You can set the height at which you enable the disabling of auto-levelling to quickly change the setting, which is passed to the printer via Gcode.
¶ Function Entrance
The function is located in [Preview] - [Auto Levelling];
Please note that this function is only supported for printers with devices FUNMAT PRO 410 G1, FUNMAT PRO 410 G2, FUNMAT PRO 610 HT, FUNMAT PRO 610 LT.
¶ Function Parameter Setting
| No. | Parameter Name |
Parameter Explanation
|
| 1 | Disable auto levelling | Default is unchecked, not enabled; disable auto levelling setting can reduce printing time. |
| 2 | Disable Auto Levelling Layer Height | When the model height is more than 3mm, the default is 3mm, when the model height is less than 3mm, it is the maximum layer height; Setting this parameter will generate U5 S0 and M420 Z+ height values in the G-code close to the layer height. |
¶ Demonstration of function use
