Compared with 2026.0.3 released on Aug 2026, here are the new features and enhancements provided in R2026.2.0 release:
¶ New Features and Enhancements
- Added support for the FUNMAT PRO 610HT NEO printer.
- Optimized software startup performance and added a loading status indicator.
- Introduced Slope Z Hop to reduce the risk of stringing.
- Optimized nozzle preheating strategy to improve printing efficiency.
- Renamed extruder labels from 01/02 to L/R for better user identification.
- Adjusted the step increment for numerical input field arrows to adapt to the number of decimal places already entered.
- Added customizable wall thickness settings to reduce the risk of wall defects in sliced models caused by mesh issues.
- Updated compatibility with Windows 11 security policies to prevent software components from being blocked.
- Optimized print path planning to enhance stability during the printing process.
- Refined the nozzle-purging strategy during tool changes to improve cleaning effectiveness and extend the lifespan of the cleaning brush.
- Adjusted the material shrinkage compensation algorithm to improve print quality for assemblies.
- Significantly increased slicing speed when processing multiple models simultaneously.
- Added the ability to view printer software/firmware versions directly on the printer panel, facilitating the management of multiple devices.
- Added a camera status indicator to help users stay informed about the printer's state.
- Optimized the connection mechanism between the slicing software and the printer for greater remote stability.
- Introduced a "Ready" status for printers, allowing users to remotely verify whether the device has completed its cleaning cycle.
- Improved software window adaptation for multi-monitor setups.
- Optimized canvas camera performance.
- Enhanced the stability of remote video feeds.
- Crash that occurred when pressing the ESC key on the home page.
- Slicing crash caused by modifying contour compensation parameters.
- Crash that occurred when importing G-code files that had been manually edited.
- Information was missing from exported reports when the username contained Chinese characters.
- The coordinates of prime tower would not update after selecting "Recommended sacrificial tower position" in the settings window.
- Support structures overlapped with the brim path.
- The program would hang when scaling a model via drag-and-drop.
- The sacrificial tower would be generated at an abnormally high position when a model had very small overhangs that did not trigger support generation.
- FUNMAT PRO 310 APOLLO
- Updated the "Raft Air Gap" parameter when printing with a single nozzle using PLA or PLA-HS.
- Optimized parameters for ABS-HS and PC-FR-HT.
- FUNMAT PRO 310 NEO
- Updated the "Raft Air Gap" parameter when printing with a single nozzle using PLA or PLA-HS.
- Optimized parameters for ABS-HS.
- Added process profile for PC-FR-HT&HIPS.
- FUNMAT PRO 610HT:
- Added four new materials: ABS-ESD, PC-FR-HT, PPS-CF, and PPS-GF.
- Changed the support material for PPS, PPS-CF, and PPS-GF to SP5010.
- Disabled monotonic support skin order for all materials in the library.
- Set Minimum Support X/Y Distance to 0.4 mm for all materials in the library.
- Updated the chamber and build-plate temperature settings for PLA.
- Optimized the shrinkage compensation for materials including ABS-HS, ASA, PEEK, PC, and PEI1010.
- Open INTAMSUITE V4.3 3mf file, we only support open the part models.
- The program's performance on AMD Radeon graphics cards is relatively poor compared to Nvida graphics cards.
- Display issues may occur after upgrading to NVIDIA graphics driver version 595.**; please update to the latest version.
- If there are missing lines after slicing a thin-walled model, please disable “Outer Wall Fixed Width.”