Add the following features:
1. Parse the chamber temperature and heat bed temperature setpoints from the gcode file. If they exceed the safety threshold, trigger alarm code 374;
2. Add a "Machine Ready" status;
3. When creating a new material, limit the maximum temperatures:
HT: Nozzle ≤ 500°C, Chamber ≤ 300°C
LT: Nozzle ≤ 350°C, Chamber ≤ 120°C;
Fix the following issues:
1. When the Machine has a level-2 error, clicking the Start Print button still triggers a start action, but printing does not actually begin;
2. Adjust the position of the decimal point on the virtual keyboard to the number key area to improve input convenience;
3. On the WiFi page, clicking the Ping edit box does not bring up the virtual keyboard. Change it so the keyboard pops up normally;
4. Currently, print process data is recorded by default. Change it to not record by default;