Here are the new features and enhancements provided in Firmware PRO610HT V1.1.3.54:
- Added reply of status for 'open the door' command in remote control.
- Increased the max operation speed to 400mm/s and the max accelration to 7000mm/sec2.
- Upgraded the auto leveling method -- from 3-point auto leveling to mesh blinear auto leveling.
- Increased the clibration accuracy by modifying the Z-axis zero offset detection to 3 times and adding the calibration log.
- Increased the detection accuracy of filament jam by adding the 'I3' command to adjust the parameter for detecting clogged nozzles.
- Improved process control for filament loading by adding command 'U39'.
- Fixed errors in errorneous 399# warning popup under several specific circumstances.
- Fixed a series of printing problems caused by errors in executing 'G0/G1' command.
- Fixed the errors in errorneous warning popup of filament run-out when switching from one filament box to another by modified G92 command.
- Fixed abnormal filament retraction due to lost bytes in communication.
- Fixed the error in abnormal execution of line width change for several printing cases with Gcode files.