1.
2.
3.
a. K1. Use a straight screwdriver to remove the right position limiter on the rail (highlighted in Figure 1.7-1). Loosen the screws and remove all cables from K1, and then slide it toward right side and take it off.
b. Use the same way to remove PS1.
c. K3 can be divided into 2 parts – relay & seat. Press the lock piece down to take the relay out (Figure 1.7-2, Figure 1.7-3). To take the seat out, follow step a & b to take K1 and PS1 out first. Then Slide the seat toward right side off the rail.
d. CB1. Remove the left position limiter on the rail first. Loosen screws and remove all cables. Then slide CB1 toward left side off the rail.
e. K2. Loosen screws and remove all cables. Remove 2 screws in the middle of it with 3mm hex screwdriver and take it off. Figure 1.7-4