1.
2.
3.
a. Power machine off and unplug the main power cable.
b. Remove left and back cover with knob wrench (Figure 1.4-1).
c. Unplug J27 on the main board, and take the cable out of the cable raceway. Figure 3.2-1
d. Coolant temperature sensor is in the coolant distribution block, fixed by a set screw. Use a 1.5mm Allen-Key to loosen the set screw a bit and pull the sensor out. Figure 3.2-2
e. Cut the cable ties and take the sensor out with its cable. Figure 3.2-3