¶ Handle of Build-plate Sheet
We provide 2 new build-plate sheets for a new FUNMAT 310 NEO, you'll find them in the top EPP when you unbox the printer. While only one sheet has the handles. So, if you are going to use the spare one, you need to take the handles off the previous one and install them onto the spare one.
It's very easy to do it.
1. Find a small straight screw driver, and use it to pry the 2 rivets off each handle.
2. Then, move the 2 handles to the spare build-plate sheet. Align the holes, put the rivets into the holes, and press and engage them.
 |
 |
 |